Categories
Rifle parts receiver parts

Guide Ar-15 Lower Parts Kit.

Ar-15 Lower Parts Kit.

The Enhanced  Lower Parts Kit is phosphate coated and includes all the foundational parts for the LPK minus the Trigger Guard, Grip, and Fire Control Assemblies.


Big Book Catalog, Issue:72, Page:047
AR-15 Lower Parts Builder Kit
2.4 2.4 based on 14 reviews
Review Summary
5 Star
 
(4)
4 Star
 
(0)
3 Star
 
(1)
2 Star
 
(2)
1 Star
 
(7)

Displaying reviews 1-14
Use the scroll bar to the right to see more reviews.

1.0

7/31/2019

Hangry Hammerer

Burlington, VT

  • Cons Fitting Required, Poor Quality
  • Describe Yourself Competitive Shooter
  • Was this a gift? No
  • Bottom Line No, I would not recommend this to a friend

Absolute Trash

Stay away from this LPK. It was missing a spring, the bolt catch plunger was out of spec. The front takedown/pivot pin had to be hammered out after the detent was installed, and the rear takedown pin was binding up even before I put the detent in. At that point of assembly I stopped, wrestled every piece out, and called Brownell’s for a return label.

1.0

11/7/2018

Aaron the man

Matthews, NC

  • Pros Aesthetically Pleasing, Easy To Install
  • Cons Poor Quality
  • Describe Yourself Occasional Shooter
  • Was this a gift? No
  • Bottom Line No, I would not recommend this to a friend

Cheap

I bought this kit just to use a few parts because I was going to use hi quality trigger and bolt catch, the mag release was with in spec, but the takedown pins and their detents were not. The front pin would grab and the rear pin wouldn’t even move I had to use a hammer and punch to remove the pin.

2.0

11/3/2018

MongoRat

Lewiston, NY

  • Pros Good Value
  • Cons Fitting Required
  • Best Uses Target Practice
  • Describe Yourself Gunsmith
  • Was this a gift? No
  • Bottom Line No, I would not recommend this to a friend

Not mil spec BEWARE

Trigger pins are larger then mill spec but can be made to fit, Safety to large to fit, mag catch spring to wide and will not work, I haven't tried the the take down pins. All the cast parts are great and worth the money on there own. In short this won't get you threw a build but it helps. Buy a better quality spring and pin kit you be fine.

1.0

10/21/2018

MickeyMouse

Apex, NC

  • Cons Fitting Required, Poor Quality
  • Describe Yourself Gun Collector
  • Was this a gift? No
  • Bottom Line No, I would not recommend this to a friend

Stay away

Bought June/2017 to keep around as spare parts. Had a lot of spare parts on my spare parts bin, decided to use them to build a stripped lower - and used this LPK as I already had it.Pivot and takedown detents (as other have said) grab the pins too much - no kidding, I had to use a brass hammer to pull both pins !Does NOT include grip screw - lucky me I had a couple lying around. Very low quality - spend $20 or $15 more and get a good LPK. Would not recommend under any circumstances.

5.0

9/2/2018

Joey

Manteca, CA

  • Pros Aesthetically Pleasing, Easy To Install, Good Value
  • Best Uses Competitive Shooting, Target Practice
  • Describe Yourself Occasional Shooter
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Nice workmanship, I’m sure mil specs

The materials that they used look durable/strong,I’m sure it’s a mil specs

2.0

8/8/2018

js117

Indiana

  • Cons Fitting Required, Flimsy Design, Poor Quality
  • Describe Yourself Competitive Shooter
  • Was this a gift? No
  • Bottom Line No, I would not recommend this to a friend

Terrible...

Good cheap kit, finish is awful, obvious porosity in casting surfaces. Safety is super gritty and take down pins are super tight.

1.0

2/6/2018

JohnJak

Oxford

  • Cons Fitting Required, Poor Quality
  • Describe Yourself Gunsmith
  • Was this a gift? No
  • Bottom Line No, I would not recommend this to a friend

Waste of Money

Would not recommend to anyone. Parts were chiseled to dimensions. Poor quality.

5.0

1/19/2018

Old Jeep Driver

Charleroi, Pa.

  • Pros Aesthetically Pleasing, Easy To Install, Good Value, Works With Many Guns
  • Best Uses Competitive Shooting, Hunting, Tactical, Target Practice
  • Describe Yourself Gunsmith
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

For the money...this kit can't be beat!

I have purchased and used these kits in the past and recently purchased two more. After reading the reviews, I thought I would give my findings. Maybe because I am a gunsmith and an experienced builder, I have not had a single problem! I will be purchasing more.

1.0

12/31/2017

Chase

Alaska

  • Cons Limited Function, Poor Quality
  • Describe Yourself Law Enforcement/Military

Poor quality overall

Same issues as the other reviewers - should've known better than to buy this. The detents for the takedown grab the takedown pins far more than they should. Took a file to them to round them off a bit to alleviate this. The safety included had a horrible feel to it - very gritty and more resistance than should be present. Swapped it for another safety lever that I had and the problem went away . Also worth noting, this kit does not include a grip screw. The picture accurately depicts that, I just overlooked it and could see others overlooking the same. Luckily I had a few extra on hand.

3.0

12/12/2017

Captain

S Fla

  • Pros Good Value
  • Cons Poor Quality
  • Best Uses Target Practice
  • Describe Yourself Gun Collector
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Get what you pay for

I bought a few of these. They are nothing special and priced accordingly. I had a bad mag dis connector and they quickly sent me a replacement, kit comes with a very plastic dis connect button. A nice cheap way to finish off your project and get it through the paces, then swap out for better parts later if you see need to. They will probably stay in a while and work fine.

1.0

9/2/2017

KalashniKEV

Arlington, VA

  • Cons Fitting Required, Limited Function, Poor Quality
  • Describe Yourself Law Enforcement/Military
  • Was this a gift? No
  • Bottom Line No, I would not recommend this to a friend

Kind of an odd LPK...

A few non-standard parts here- for one, the takedown detents are black (not gold) and asymmetrical in shape. The blunt end needs to face the pin, because the pointy end will lock your pin. FCG pins are .155 or greater, and would not pass through a Noveske lower (NBD, I have a pile of standard pins on my bench). Selector detent, also too pointy to interface with the selector (or recess too deep?) maybe they will break in as they grind, but I junked those too. Lastly, the BHO roll pin is a spiral vs. a C (again, no biggie, just strange). I would avoid this product.

5.0

8/25/2017

Wingus

Ga

  • Pros Aesthetically Pleasing, Easy To Install, Good Value, Safe
  • Describe Yourself Occasional Shooter
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Works fine

Used in a build for a friend. I didn't notice any problems. It went into an Anderson lower and I did not use the trigger springs. Will buy another for future builds

1.0

5/12/2017

Cody

WPB, FL

  • Pros Good Value
  • Cons Limited Function, Poor Quality
  • Describe Yourself Hunter
  • Was this a gift? No
  • Bottom Line No, I would not recommend this to a friend

I do not recommend.

Kit seemed fine looking it over initially. Once installed the safety selector switch does not smoothly rotate from safe to fire. It feels gritty and takes more force than it should. My other issue is the take down pins. Same issue, they do not smoothly push out and take more force than normal. It's like the detent is binding on the surface of the selector and take down pins. The rest of the kit is fine and I'll make do with the take down pins. The safety selector, I will have to replace for something else. It just feels terrible.

5.0

3/31/2017

Paul C

Kansas

  • Pros Easy To Install, Good Value, Safe, Works With Many Guns
  • Best Uses Competitive Shooting, Hunting, Self Defense, Tactical, Target Practice
  • Describe Yourself Law Enforcement/Military
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Great quality at a reasonable price!

Great finish and fit. Not covered in sloppy grease but lightly coated in preservative. Everything fit great! The front pivot pin fit very snugly and took out all the upper/lower slop in two sets I tried it in. I've spent money on National Match and oversized pins and this one worked just as well. I'll buy again for sure.

Ar-15 Lower Parts Kit. InStock yes  Valid Offer! Things to Buy at this store. If you are not fully satisfied with your purchase, you are welcome to return any unworn and unwashed items with tags intact and original packaging included.Buy at this store. See Detail Online And Read Customers Reviews Ar-15 Lower Parts Kit. prices over the online source See people who buy "Ar-15 Lower Parts Kit. "Research before buy online Ar-15 Lower Parts Kit. Make sure the shop keep your private information private before you buy Ar-15 Lower Parts Kit. Make sure you can proceed credit card online to buy Ar-15 Lower Parts Kit. while the store protects your information.

Summary

Shopping Tips for buy Ar-15 Lower Parts Kit.  No online shopping store/website needs your social security number or your birthday to do business then chances are you don't give this information to store/website. AND Don't wait for the bill to come at the end of the month. Go online regularly throughout the holiday season and glance at electronic statements for the credit card, debit card, and checking accounts. Make sure you do not see any fraudulent charges. If you found fraudulent charges. If you would like to buy Ar-15 Lower Parts Kit. . Please buy it from trusted store.

Categories
Rifle parts receiver parts

[#1] 308 Ar M5 Lower Receiver.

308 Ar M5 Lower Receiver.

The Aero Precsion M5 308 Lower Receiver allows you to build a custom big-bore AR from the ground up.  Mil-spec dimensions and coating ensure the highest quality and correct component interface.  Receiver fits DPMS pattern components, including magazines and upper receivers.  Machined from 7075-T6 aluminum, and finished with a matte black hard-coat anodized Mil 8625 Type 3 Class 2 finish.  Rear takedown pin detent hole threaded 4-40 to allow for a set screw to retain the takedown pin.  Bolt catch is threaded for a screw pin, so that no roll pin is needed.  Integrated trigger guard and selector markings that function with 45, 60 or 90 degree safety selectors.  Accepts Battle Arms Development short throw safety selectors (100-009-866), but also functions with standard safeties.


AR-15, Issue:11, Page:007
Big Book Catalog, Issue:72, Page:008

308 Ar M5 Lower Receiver. InStock yes  Valid Offer! Things to Buy at this store. If you're not fully satisfied with your purchase, you are welcome to return any unworn and unwashed items with tags intact and original packaging included.Buy at this store. See Detail Online And Read Customers Reviews 308 Ar M5 Lower Receiver. prices over the online source See people who buy "308 Ar M5 Lower Receiver. "Research before buy online 308 Ar M5 Lower Receiver. Make sure the store keep your private information private before you buy 308 Ar M5 Lower Receiver. Make sure you can proceed credit card online to buy 308 Ar M5 Lower Receiver. as well as the store protects your information.

Summary

Shopping Tips for buy 308 Ar M5 Lower Receiver.  No online shopping store/website needs your social security number or your birthday to do business Then you don't give this information to store/website. AND Don't wait for the bill to come during the end associated with the month. Go online regularly throughout the holiday season and have a look at electronic statements for the credit card, debit card, and checking accounts. Make sure you don't see any fraudulent charges. If you found fraudulent charges. If you want to buy 308 Ar M5 Lower Receiver. . Please buy it from trusted store.

Categories
Rifle parts receiver parts

Guide Ar-15 Lower Receiver W/installed Lower Parts Kit.

Ar-15 Lower Receiver W/installed Lower Parts Kit.

Made from a high-strength, 7075 T6 aluminum forging for reliable performance and outstanding durability. Mil-Spec, hard anodized finish adds extra strength to the receiver walls and delivers superior abrasion-resistance for rugged field use. Precision-machined to ensure drop-in installation of Mil-Spec, aftermarket components. The Anderson lower parts kit comes installed in the lower.


Big Book Catalog, Issue:70, Page:005

Item Details

Cartridge: 223 Remington, 5.56 mm NATO

Finish: Black

Style: Mil-Spec

Made in the USA

AR-15 Lower Receiver with Installed Lower Parts Kit
4.0 4.0 based on 4 reviews
Review Summary
5 Star
 
(3)
4 Star
 
(0)
3 Star
 
(0)
2 Star
 
(0)
1 Star
 
(1)

Displaying reviews 1-4
Use the scroll bar to the right to see more reviews.

5.0

12/8/2016

Troy

Dededo, Guam

  • Pros Aesthetically Pleasing, Easy To Install, Good Value, Works With Many Guns
  • Best Uses Competitive Shooting, Hunting, Self Defense, Target Practice
  • Describe Yourself Gun Collector
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Very good for budget build.

Recommended this to a couple of friends for new builds. Upon receiving, nice finish and pre-assembly. Integrated machined trigger guard along with parts kits is an excellent value for the money. Mated with the Brownells flat top upper and you have a chassis to build a very good rifle platform. Already built the upper assembly prior to receiving and when put together, very snug and no slop between them. My buddy was extremely pleased with the final build, considering how much he saved instead of taking a built rifle and upgrading to what he would want to have installed. I have built 4 Anderson stripped lowers and if this was available then, I would have gone with these instead.

5.0

10/26/2016

Jason

St.Louis, MO

  • Pros Aesthetically Pleasing, Easy To Install, Good Value, Safe, Tough, Works With Many Guns
  • Best Uses Competitive Shooting, Hunting, Self Defense, Tactical, Target Practice
  • Describe Yourself Gun Collector
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Excellent quality and value

Fit, form, and function are excellent. Trigger group performed flawlessly. Parts included were good quality and everything went together without any issues. Fit to uppers is spot on with perfect pin alignment to uppers by deferent manufacturers. Love the one piece trigger guard. Also own server Anderson Uppers and all dropped on and performed perfectly out of the box. This is quality. Buy them now so you will be able to share them with future generations.

1.0

9/22/2016

Ranger02

Shabbona IL.

  • Cons Poor Quality
  • Best Uses Self Defense, Tactical, Target Practice
  • Describe Yourself Gun Collector
  • Was this a gift? No
  • Bottom Line No, I would not recommend this to a friend

Very Disappointed

The safety was sloppy and the trigger was tight and rough! I had to replace with a BCM trigger assembly. I will not purchase any Anderson products. This one must have missed quality control!

5.0

8/25/2016

Mr. H

Virginia Beach VA

  • Pros Aesthetically Pleasing, Easy To Install, Good Value, Safe, Tough, Works With Many Guns
  • Best Uses Competitive Shooting, Hunting, Self Defense, Tactical, Target Practice
  • Describe Yourself Gun Collector
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Great Lower. Cheap price... Not Quality!

ANDERSON. Quickly Becoming the Name to Buy! For a long time I would use nothing but Bushmaster. (Just for the name). I decided to try ANDERSON, due to the price. Since then, I have bought more. I continue to stay on the waiting list as they come in. (This must show you that others have also found out that they are of Great Quality)! Now they come assembled. For the low price they charge for a lower and you still have to buy a parts kit, it is cheaper to buy completed and you do not even have to use your time to assemble. (You can buy this assembled lower and a assembled upper and just insert the (2) takedown pins and you are complete ready to go)! It gets no better than that! Buy ANDERSON. You won't be Disappointed! I have more coming! I can't wait!

Ar-15 Lower Receiver W/installed Lower Parts Kit. InStock yes  Valid Offer! Things to Buy at this store. If you're not fully satisfied with your purchase, you are welcome to return any unworn and unwashed items with tags intact and original packaging included.Buy at this store. See Detail Online And Read Customers Reviews Ar-15 Lower Receiver W/installed Lower Parts Kit. prices throughout the online source See people who buy "Ar-15 Lower Receiver W/installed Lower Parts Kit. "Research before buy online Ar-15 Lower Receiver W/installed Lower Parts Kit. Make sure the shop keep your private information private before you buy Ar-15 Lower Receiver W/installed Lower Parts Kit. Make sure you can proceed credit card online to buy Ar-15 Lower Receiver W/installed Lower Parts Kit. and the store protects your information.

Summary

Shopping Tips for buy Ar-15 Lower Receiver W/installed Lower Parts Kit.  No online shopping store/website needs your social security number or your birthday to do business then chances are you don't give this information to store/website. AND Don't wait for the bill to come at the end for the month. Go online regularly during the holiday season and look at electronic statements for the credit card, debit card, and checking accounts. Make sure you do not see any fraudulent charges. If you found fraudulent charges. If you would like to buy Ar-15 Lower Receiver W/installed Lower Parts Kit. . Please buy it from trusted store.

Categories
Rifle parts receiver parts

Review Ar-15 Jack 9 Stripped Lower Receiver For Glock™ 9mm.

Ar-15 Jack 9 Stripped Lower Receiver For Glock™ 9mm.

Stripped Lower for Your Pistol Carbine Build

The Angstadt Arms Jack 9 stripped AR-15 lower receiver for Glock 9mm features an iconic skull design. The receiver features an integrated, oversized trigger guard and is machined from 7075-T6 billet aluminum with a matte black hard-coat anodized finish. The Jack 9 stripped lower receiver will accept 9mm, .40 S&W, and .357 SIG Glock magazines.

  • Works with any mil-spec upper receiver
  • Threaded bolt catch screw
  • For use with 9mm bolt carrier assembly and standard AR-15 hammer

The Angstadt Arms Jack 9 stripped lower receiver is recommended for use with Glock factory magazines.

Item Details

Cartridge: 9 mm Luger

Finish: Black

Style: Stripped

Made in the USA

AR-15 Jack 9 Stripped Lower Receiver For Glock? 9mm

Ar-15 Jack 9 Stripped Lower Receiver For Glock™ 9mm. InStock yes  Valid Offer! Things to Buy at this store. If you are not fully satisfied with your purchase, you are welcome to return any unworn and unwashed items with tags intact and original packaging included.Buy at this store. See Detail Online And Read Customers Reviews Ar-15 Jack 9 Stripped Lower Receiver For Glock™ 9mm. prices throughout the online source See individuals who buy "Ar-15 Jack 9 Stripped Lower Receiver For Glock™ 9mm. "Research before buy online Ar-15 Jack 9 Stripped Lower Receiver For Glock™ 9mm. Make sure the shop keep your private information private before buying Ar-15 Jack 9 Stripped Lower Receiver For Glock™ 9mm. Make sure you can proceed credit card online to buy Ar-15 Jack 9 Stripped Lower Receiver For Glock™ 9mm. as well as the store protects your information.

Summary

Shopping Tips for buy Ar-15 Jack 9 Stripped Lower Receiver For Glock™ 9mm.  No online shopping store/website needs your social security number or your birthday to do business Then you don't give this information to store/website. And do not wait for the bill to come during the end for the month. Go online regularly throughout the holiday season and glance at electronic statements for the credit card, debit card, and checking accounts. Make sure you do not see any fraudulent charges. If you found fraudulent charges. If you would like to buy Ar-15 Jack 9 Stripped Lower Receiver For Glock™ 9mm. . Please buy it from trusted store.

Categories
Rifle parts receiver parts

Guide Ar-15 Stripped Lower Recievers.

Ar-15 Stripped Lower Recievers.

The Sons of Liberty Gun Works AR-15 lower receivers are built from mil-spec 7075-T6 forgings from the lead forge in the U.S. They contour is fully machined leaving no flash marks from the forging. SOLGW take extra care when machining their lower receivers resulting in tolerances that are tighter and fits that are better than other lower receivers. SOLGW uses mil-spec Matte black hard-coat anodized Mil 8625 Type 3 Class 2 finish.

Available in an array of different designs including Angry Patriot, Soul Snatcher, Lone Star, Scalper, Rebellious Stripes, and Loyal 9.

Angry Patriot M4 Stripped Lower Reciever

Ar-15 Stripped Lower Recievers. InStock yes  Valid Offer! Things to Buy at this store. If you are not fully satisfied with your purchase, you are welcome to return any unworn and unwashed items with tags intact and original packaging included.Buy at this store. See Detail Online And Read Customers Reviews Ar-15 Stripped Lower Recievers. prices over the online source See individuals who buy "Ar-15 Stripped Lower Recievers. "Research before buy online Ar-15 Stripped Lower Recievers. Make sure the store keep your personal information private before buying Ar-15 Stripped Lower Recievers. Make sure you can proceed credit card online to buy Ar-15 Stripped Lower Recievers. as well as the store protects your information.

Summary

Shopping Tips for buy Ar-15 Stripped Lower Recievers.  No online shopping store/website needs your social security number or your birthday to do business then chances are you don't give this information to store/website. AND Don't wait for your bill to come during the end associated with the month. Go online regularly throughout the holiday season and look at electronic statements for your credit card, debit card, and checking accounts. Make sure you don't see any fraudulent charges. If you found fraudulent charges. If you want to buy Ar-15 Stripped Lower Recievers. . Please buy it from trusted store.

Categories
Rifle parts receiver parts

Ar-15 Lower Parts Kit. Which model to use?

Ar-15 Lower Parts Kit.

Sub-Assembly, Mil-Spec Parts Packaged In Money-Saving Kits

The easiest way to stock and sell genuine, mil-spec AR-15 parts, or use to assemble rifles on your receivers. Much lower in total cost than buying the parts one at a time. Kit contains only new, current-production, genuine, mil-spec parts; never pull-offs or direct-exchange surplus. Lower Receiver Parts Kit includes trigger spring, trigger pin, hammer spring, hammer pin, disconnector and spring, bolt catch, bolt catch plunger, bolt catch spring, bolt catch roll pin, selector, selector detent, selector detent spring, (2) takedown detents and springs, pivot pin, rear takedown pin, buffer retainer and spring, magazine catch, button and spring, screw and washer, triggerguard assembly, pin, hammer, trigger and pistol grip.


AR-15, Issue:11, Page:039
Big Book Catalog, Issue:72, Page:047
Sinclair, Issue:5B, Page:250
AR-15 Lower Parts Kits
3.9 3.9 based on 94 reviews
Review Summary
5 Star
 
(47)
4 Star
 
(19)
3 Star
 
(11)
2 Star
 
(8)
1 Star
 
(9)

Displaying reviews 1-94
Use the scroll bar to the right to see more reviews.

5.0

10/18/2019

Terry

Michigan

  • Pros Good Value, Safe, Tough, Works With Many Guns
  • Best Uses Competitive Shooting, Hunting, Self Defense, Tactical, Target Practice
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Quality parts to support a quality build

DPMS Makes quality parts and firearms. My hobby(?) is building MSRs. I have some value-add triggers from HiperFire & Gieslle (sp) and the stock DPMS are nearly as good, except for a bit longer reset distance. I have never had a gritty, uncertain or unreliable DPMS trigger group. Unless you are very trigger-sensitive, buy these, install them correctly, and enjoy them. My only negative is the inclusion of the pistol grip. I have a bunch of these laying around. I just don't like the feel of them and the finger bump never fits my hands.

4.0

10/18/2019

j.savage

bloomington, indiana

  • Pros Easy To Install, Good Value
  • Best Uses Hunting, Self Defense, Target Practice
  • Describe Yourself Gun Collector
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

exactly what it says it is

this is a great mill spec lower parts kit; it is exactly what it says it is, a basic mill spec lower parts kit; no bells no whistles everything fits and is well made. if you want something to get a lower running this is close to perfect. dont expect this to be smooth and polished; it is well made but it is a BASIC just what you need to make it to bang kit.

5.0

10/11/2019

timbo

Lancaster, OH

  • Pros Easy To Install, Good Value, Tough, Works With Many Guns
  • Best Uses Competitive Shooting, Hunting, Self Defense, Tactical, Target Practice
  • Describe Yourself Occasional Shooter
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Quality lower parts!

Can't go wrong with quality name brand parts! Low price on this DPMS parts kit. Brownells is great! I will be ordering more.

3.0

10/8/2019

JBA

VT

  • Pros Easy To Install
  • Best Uses Hunting, Target Practice
  • Describe Yourself Gunsmith
  • Was this a gift? No
  • Bottom Line No, I would not recommend this to a friend

Missing parts.

I'm boutique AR-15 builder. I build a few dozen under my 07 FFL. I bought 4 of these kits and one was missing the roll pin for the bolt release and another was missing the grip bolt.Not a big deal for me because I have many extra parts. But if you are a first time buyer to build an AR it would suck.

5.0

9/20/2019

Robert

Phoenix, AZ

  • Pros Good Value
  • Best Uses Hunting, Target Practice
  • Describe Yourself Occasional Shooter
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Great parts kit

Everything dropped right in and fit as it should. The small parts were in a bag to sort through, but manageable.

2.0

7/26/2019

EagleEye

TN

  • Pros Aesthetically Pleasing, Easy To Install
  • Cons Fitting Required, Limited Function, Poor Quality
  • Best Uses Hunting, Self Defense, Target Practice
  • Describe Yourself Occasional Shooter
  • Was this a gift? Yes
  • Bottom Line No, I would not recommend this to a friend

double fire

Every time i pull the trigger it double firers. Was fun the first time but scary the second madding the third. makes shooting accurately impossible.

4.0

6/9/2019

Mike

Texas

  • Pros Easy To Install, Good Value
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Good simple kit, though unorganized

All the small parts are just jumbled into a bag which is quite annoying, but at least they put a schematic on the back to help identify items for beginners. All the parts fit well and there were no problems

5.0

6/2/2019

RGVshooter

TEXAS

  • Pros Easy To Install, Good Value, Works With Many Guns
  • Best Uses Hunting, Self Defense, Target Practice
  • Describe Yourself Competitive Shooter
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Great Value

Not sure what the other's are complaining about. This is my 2nd parts kit as the first went into a Anderson lower and the 2nd went into a Savage lower. It's the owners responsibility to ensure if the parts kit will drop into their lower as some lowers have a different diameter trigger/hammer holes drilled. This kit is Mil-spec meaning that if your lower is Mil-Spec'd then this parts kit will drop right on it. The parts are of high quality and finish. My first AR build has over 5k rounds fired and still going strong. The trigger will get smoother in time as you shoot it but out of the box it's more than adequate for "government work". lol...

2.0

4/27/2019

CB

Illinois

  • Pros Good Value
  • Cons Limited Function, Poor Quality, Rusts Quickly
  • Describe Yourself Occasional Shooter
  • Was this a gift? No
  • Bottom Line No, I would not recommend this to a friend

Terrible Trigger

I bought this parts kit about a year ago and used it to build my first AR. Following YouTube tutorials that I had saved to my phone, it was fairly easy and I checked multiple times to ensure that all the parts were properly installed. I just recently bought the upper receiver for my AR (A 20" BCM) and took it out to test fire with some Frontier 55 grain ammunition. In the first range test, I shot 46 rounds total. The gun failed to fire nine times. When I checked the ammunition that failed to fire, I discovered that the primer had been struck by the pin. Not wanting to believe I had made a mistake by using a fairly inexpensive trigger, I initially chalked it up to a bad batch of ammo. A few days ago I took the gun out again and fired a full 30 round magazine of Frontier. Two more rounds had light strikes. Bear in mind that these were not mag dumps; I was actually taking my time with each shot. After the 11th light strike, I decided to buy different ammo and bought some Federal American Eagle 55 grain from a different sporting goods store. When I fired less than a full magazine yesterday, the gun once again malfunctioned. When I hinged the upper open to look at the trigger, I discovered that the trigger was rusting. It had been well oiled when I installed it, had stayed in a climate controlled area from the time I installed it to the first use, and since I have only shot the gun on four occasions with less than 100 total rounds of ammunition through the gun, I did not see a reason to break the gun apart and clean it at any point. I am currently waiting on a replacement trigger from BCM. Remember before purchasing that you get what you pay for and just go for a Geissele parts kit with something like a BCM PNT trigger instead of this.

3.0

2/1/2019

Dlp1009

PA

  • Cons Fitting Required, Poor Quality
  • Describe Yourself Gun Collector
  • Was this a gift? No
  • Bottom Line No, I would not recommend this to a friend

Some parts didn’t fit right

Decent kit I guess. Trigger guard and bolt catch roll pins wouldn’t fit, bolt catch spring was slightly deformed and wouldn’t go in. Probably wouldn’t buy it again.

5.0

10/1/2018

Sharky

Baltimore, MD

  • Pros Aesthetically Pleasing, Easy To Install, Good Value, Safe, Tough, Works With Many Guns
  • Best Uses Competitive Shooting, Self Defense, Tactical, Target Practice
  • Describe Yourself Occasional Shooter
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Great Deal

I ordered my kit. It came fast. The kit was perfectly sealed, and it came with *everything* it was supposed to have, so I don't know what others were complaining about regarding missing pieces. It went together nicely with very little trouble. In fact, I like this kit so much I purchased another. I would highly recommend this kit, especially for the first time builder.

5.0

4/23/2018

IDShooter

Idaho

  • Pros Easy To Install, Good Value
  • Best Uses Tactical, Target Practice
  • Describe Yourself Occasional Shooter
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Does what it says on the tin.

Bought one of these to install into a Ruger stripped lower. All the parts were in spec, no fitting needed, everything functions properly. I've got no complaints. If I ever decide to build another lower, I'll definitely buy another DPMS parts kit.If this is your first time building a lower, I would recommend to order an extra detent and detent spring from Brownells along with this kit as well. Those parts tend to go flying when you install the front pivot pin, and extras are cheap insurance to make sure your build stays on track.And regarding all the complaints about the trigger pull - you're buying a mil-spec parts kit, don't be surprised when you get a heavy mil-spec trigger

5.0

3/1/2018

Mike M

Colorado

  • Pros Easy To Install
  • Best Uses Competitive Shooting, Hunting, Self Defense, Tactical, Target Practice
  • Describe Yourself Gunsmith
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Great Kit

Great Kit. Easy Install. Everything lines up and works properly. Excellent for customers and shooters on a budget.

5.0

2/4/2018

Oskie

Riverside,CA

  • Pros Aesthetically Pleasing, Easy To Install, Good Value, Safe, Tough, Works With Many Guns
  • Best Uses Competitive Shooting, Hunting, Self Defense, Tactical, Target Practice
  • Describe Yourself Gunsmith
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Oskie

I bought this dpms trigger kit and its a great anodized material kit its very easy to install and works very flawless i will be buying more of these

4.0

1/16/2018

STRIKER578

MARYLAND

  • Pros Easy To Install, Good Value, Safe, Tough, Works With Many Guns
  • Cons Fitting Required
  • Best Uses Hunting, Self Defense, Tactical
  • Describe Yourself Gunsmith
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

A GOOD HEAVY COMBAT TRIGGER

I gave this 4 Stars because it is just as advertised A Mil-Spec Trigger. That said It has a Very Heavy Trigger Pull, in excess of 6 pounds! It Breaks Cleanly with the expected GI Over Travel. Using a Good Quality assembly lube (like Frog Lube) will greatly improve the trigger pull. It installs easily although I prefer Anti Walk Pins. Aftermarket Springs are available should you desire to try to lighten the trigger pull but are Not For Combat / Self Defense Uses. If you want a Better Trigger Pull get Another Trigger. We Get What We Pay For... :)

1.0

12/20/2017

Jack

NY

  • Cons Flimsy Design, Poor Quality
  • Describe Yourself Competitive Shooter
  • Was this a gift? No
  • Bottom Line No, I would not recommend this to a friend

Plastic and Scrap

Absolute garbage. Was missing parts. The parts that are there feel gritty and poorly made. The handle has literally the same feel as the handle off of a Nerf gun.

5.0

12/6/2017

Dragonkeep

High Point, NC

  • Pros Easy To Install, Good Value, Safe
  • Best Uses Self Defense, Tactical, Target Practice
  • Describe Yourself Law Enforcement/Military
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

No Problems

I purchased this lower parts kit to complete a DPMS stripped lower that I had. No parts were missing and I had no problems installing them. After completing my rifle build I found that all of the lower parts performed well with no issues.

3.0

11/24/2017

Andrew

San Antonio, TX

  • Pros Good Value, Safe, Works With Many Guns
  • Cons Fitting Required, Poor Quality
  • Best Uses Competitive Shooting, Hunting, Self Defense, Tactical
  • Describe Yourself Law Enforcement/Military
  • Was this a gift? No
  • Bottom Line No, I would not recommend this to a friend

Mostly good, out of spec magazine catch.

Magazine catch out of spec. Had to do a bit of sanding to get it to be able to fit into the receiver.

5.0

10/25/2017

Mike the engineer.

Central Utah

  • Pros Aesthetically Pleasing, Easy To Install, Good Value
  • Best Uses Competitive Shooting, Hunting, Self Defense, Tactical, Target Practice
  • Describe Yourself Hunter
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

This is a great parts kit.

Fit perfectly and functions flawlessly. Great price. Seems well machined. Would highly recommend this product.

3.0

9/22/2017

Cam

Iowa

  • Best Uses Target Practice
  • Describe Yourself Occasional Shooter
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Parts were good, hard trigger

I didn't have any issues with burrs or blems like some other people. My only complaint was the trigger is a very difficult to pull. Additionally, one of the pins in the trigger group came loose in 100-150 rounds.

1.0

6/2/2017

Don

Pa

  • Cons Fitting Required, Poor Quality
  • Was this a gift? No
  • Bottom Line No, I would not recommend this to a friend

Dpms blem parts kit

More stuff that should have sold as blems. Burs on hammer and disconnector, sharp edges on trigger pins, sharp burr on mag release.

3.0

5/4/2017

Barnaby Wilde

Springtown, TX

  • Pros Safe
  • Cons Fitting Required
  • Best Uses Self Defense, Tactical, Target Practice
  • Describe Yourself Gun Collector
  • Was this a gift? No
  • Bottom Line No, I would not recommend this to a friend

Bolt Catch Spring was too long...

I was putting together a lower assembly based upon a stripped Anderson lower receiver. Almost everything fit nicely and functioned properly except the Bolt Catch. None of the magazines I have, from Vietnam era Colt pieces to the latest Magpul M3 PMAGs, could manage to trip the Bolt Catch. I decided to remove a coil from the Bolt Catch Spring and re-square it. Better, but not enough. I removed another coil, and re-squared. Bingo! It worked! I wouldn't mind too much except that removing and reinstalling the Bolt Catch Roll Pin to get to the spring, without scratching the receiver, is one heck of a challenge (for me, anyway) and, of course, fitting should not have been required.Everything else was fine. No pieces missing. No other fit or function problems. Of course, your mileage may vary...

5.0

5/1/2017

Wildcat

McMechen, WV

  • Pros Easy To Install, Good Value
  • Best Uses Self Defense, Tactical
  • Describe Yourself Competitive Shooter
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Complete DPMS Parts Kit

After viewing the reviews that were complaining about missing parts I decided to take a chance and see for myself.Before assembly I checked for all pieces and found none missing.This was my first build and all parts went into my lower (Anderson) smoothly and without a hitch.I would recommend that other builders give this kit a try as the price is hard to beat.

3.0

4/2/2017

Evan Plays Chess

Blacklick, Ohio

  • Pros Good Value
  • Cons Poor Quality
  • Describe Yourself Occasional Shooter
  • Was this a gift? No
  • Bottom Line No, I would not recommend this to a friend

Missing parts!

Was starting my first lower build, and after getting a couple of steps in I realized I am missing about 6 different parts from this kit. This put an unexpected halt to my progress while I wait to hear from DPMS (emailed them with a list of the missing parts). And no, I wasn't missing small things like detents or any of those little springs. Key components were missing.

3.0

3/30/2017

Karl

Ellicott City, MD

  • Pros Good Value
  • Describe Yourself Gun Collector
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Missing parts.

I ordered two kits, both of them turned out to be missing the same parts.Hammer spring, bolt catch screw, disconnector, trigger spring, hammer and trigger pins were missing. Odd that both kits lacked the same parts. A call to Brownells solved the problem and the parts are now on their way to me. That is good customer service.

3.0

3/30/2017

Fatcat

Finley, ND

  • Pros Good Value
  • Cons Poor Quality
  • Best Uses Self Defense
  • Describe Yourself Gun Collector
  • Was this a gift? No
  • Bottom Line No, I would not recommend this to a friend

Kinda on the fece on this one

Ordered two of these kits to build a couple of lowers. I'm guessing the quality of the parts are no better or worse than what comes on most lower end ar's. Parts all fit and functioned properly. Trigger break is right around 8 pounds, a bit on the stout side, but acceptable. Fair product for a fair price, I guess. Would have thought a little more highly about the product if all of the parts were in the kit. BOTH kits arrived missing the disconnector. I can see this happening occasionally, but BOTH KITS? Called the phone number on the kit, DPMS told me straight out they won't cover it, call Brownell's. Five stars to Brownell's for sending out, on their dime the missing parts that DPMS did't put in the kit.

2.0

3/1/2017

PJD642

East of Cleveland

  • Describe Yourself Law Enforcement/Military
  • Was this a gift? No
  • Bottom Line No, I would not recommend this to a friend

Missing the mag release sping....

Like the other reviewer, my build is now on hold until I receive another LPK (went with CMMG this time, along with a Colt buffer tube, plate & castle nut) because the mag release spring was missing from the jumble of parts slopped together in the flimsy zip-top bag DPMS packages everything in.Gonna save these as spares, i guess.

5.0

2/21/2017

Reload556

Albuquerque, NM

  • Pros Easy To Install, Good Value, Safe
  • Best Uses Target Practice
  • Describe Yourself Gun Collector
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Good parts kit

Bought this parts kit for a 9mm build. Kit was received complete.All parts fit without issue. While this is not a precision trigger, it is not the worst trigger out there. Overall, good basic parts for the price.

5.0

2/5/2017

smlyon

New Bern, NC

  • Pros Easy To Install, Good Value
  • Best Uses Hunting, Self Defense, Tactical, Target Practice
  • Describe Yourself Law Enforcement/Military
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Great for the price

The parts kit fit perfect on my AR build. The trigger is excellent for a stock, non-competition trigger. Mine had a clean break and a very tactile and audible reset. Would use again in any other lower build.

5.0

1/30/2017

MM

NC

  • Pros Good Value
  • Best Uses Self Defense, Tactical, Target Practice
  • Describe Yourself Gun Collector
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Good trigger for the price

Good trigger and group, especially for the price. I bought this for a 9 mm AR build and was not expecting much. The trigger far exceeded my expectations. Trigger pull was 7 1/4 lbs, broke clean. Not bad for a new, stock trigger on an AR.

1.0

1/12/2017

Alex

Atlanta, IN

  • Describe Yourself Hunter
  • Bottom Line No, I would not recommend this to a friend

Missing Magazine catch spring

Giving this a 1-star because my kit was missing a magazine catch spring which delayed the entire build. Otherwise the parts were quality. My trigger group had a very small amount of slack, but broke cleanly.

5.0

1/8/2017

Pj

Iowa

  • Pros Easy To Install, Good Value
  • Best Uses Competitive Shooting, Hunting, Self Defense, Tactical, Target Practice
  • Describe Yourself Hunter
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

good product

Everything went into place perfect in a rock river lower!

Categories
Rifle parts receiver parts

Ar-15 Nc-9 9mm Lower Receiver Glock™ Mag Compatible. Where to buy?

Ar-15 Nc-9 9mm Lower Receiver Glock™ Mag Compatible.

Dedicated AR-15 Lower for use with Glock® magazines. Accepts small frame magazines, such as 17, 19 & 22 mags. Includes magazine release and ejector. Machined from 7075-T6 aluminum. Matte black anodized finish per Mil 8625 Type 3 Class 2. Precision machined mag well with bevelled lip. Machined and engraved for use with 45 and 60 degree safety selectors. "Multi" caliber marking. Compatible with most AR-15 components. Take down pin spring and detent hole is threaded for a 4-40 screw for easy capturing (included). Upper tension screw behind grip screw. Ambidextrous trigger finger rests with grooves. Threaded bolt catch pin (includes pin). Integrated large winter triggerguard. Proprietary magazine catch assembly and included ejector. Lower receiver does not have last round bolt hold open functionality.


Big Book Catalog, Issue:71, Page:009

Item Details

Cartridge: 9 mm Luger

Finish: Black

Style: Stripped

Made in the USA

AR-15 NC-9 Lower Receiver Glock? Mag 17/19
4.8 4.8 based on 4 reviews
Review Summary
5 Star
 
(3)
4 Star
 
(1)
3 Star
 
(0)
2 Star
 
(0)
1 Star
 
(0)

Displaying reviews 1-4
Use the scroll bar to the right to see more reviews.

5.0

12/31/2017

Chase

Alaska

  • Pros Aesthetically Pleasing
  • Describe Yourself Law Enforcement/Military
  • Bottom Line Yes, I would recommend this to a friend

Phenomenal lower

One of the best lowers I have handled, the fit and finish are top notch. The magazine catch has a positive feel and reliably drops free. Well worth the price, would buy again.

5.0

10/5/2017

Slim

BFE FL.

  • Pros Aesthetically Pleasing, Good Value
  • Best Uses Self Defense, Target Practice
  • Describe Yourself Gunsmith
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

VERY WELL milled and thought out!

I've yet to install any parts in this AR-9 lower, but wanted to review how well the milling is such as the magazine well is VERY WELL thought out design with a GREAT bevel job so the magazine doesn't have to be perfectly square on the mag well for the magazine to start and then square itself up do to the very well designed and shaped mag well for super fast reloads. There's no mill marks like I've seen on poor quality lowers where you can see the actual swirl mark in a spot or two from the milling bit, or even worse the same round mill bit marks across the entire surfaces. This lower showed up in great shape other than a small ding with the anodizing gone which is the only thing I could complain about. But I plan to Duracoat it in FDE so doesn't really matter this time. I plan to buy another one at least and probably the new 10mm/45ACP for a 10mm build. Truly a great product, just wish it had the last round bolt hold open feature when the magazines empty. I as well as the last reviewer will buy more when they get in the bolt hold open feature on an empty magazine version lower, it's a great feature I hope they get made soon. Overall.... Great! Oh... The magazine catch/release and ejector do NOT come installed and come in a bag. And if you have smaller hands especially females you'll probably want the extended magazine catch/release that is also available by Critical Capabilities. Or would be great for tactical type or competition shooters where you want a faster mag exchange. Hope this helps people! Good luck shooters!

4.0

5/13/2017

Steve

Hancock, MN

  • Pros Aesthetically Pleasing, Easy To Install, Good Value, Safe, Tough, Works With Many Guns
  • Best Uses Self Defense, Tactical, Target Practice
  • Describe Yourself Gun Collector
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Critical Capabilities Glock mag lower re

After acquiring all my build parts, I took this to the range and it was excellent feeding, ejecting. The only issue was the factory Glock 33 rd. mag would not come out. the mag release was tight, had to wiggle the mag to get it to release. however the Magpul 21 rd. mag had no such problem. Mags also seem to need a hefty slap to get them to lock up on a closed bolt and none of the mags were fully loaded. Magazine catch might just need breaking in.

5.0

1/6/2017

Ty

Utah

  • Pros Aesthetically Pleasing, Easy To Install, Good Value
  • Best Uses Tactical
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Super nice lower

Top notch fit and finish, really nice. Glock mags come in and out easily. The mag release is plastic, seems to be made of very similar material as glock mags, should be very compatible. Instructions are not included, but you really don't need them if you are familiar with ARs. This is a really well made and well finished lower. The only things I can fault are the font they used to engrave the model and serial number, wish they would have used the same as the mfg on the other side. I also would prefer just safe and fire in lieu of the the cheesy pictures. Those are minor issues that have no impact in my opinion. This lower DOES NOT have bolt hold open functionality which is stated in the Brownells description. The mfg is supposedly coming out with a BHO version soon. Overall I couldn't be happier, I will buy another when the BHO comes out.

Ar-15 Nc-9 9mm Lower Receiver Glock™ Mag Compatible. On Sale . For those who are trying to find Ar-15 Nc-9 9mm Lower Receiver Glock™ Mag Compatible. review. We have more details about Detail, Specification, Customer Reviews and Comparison Price. I would really like recommend that you check the cost To get a cheap price or whole lot. Order your own Ar-15 Nc-9 9mm Lower Receiver Glock™ Mag Compatible. came from here. You will be surprised to determine how convenient this system can be, and you will feel good if you know this Ar-15 Nc-9 9mm Lower Receiver Glock™ Mag Compatible. is amongst the best selling item on today.

Summary

If you find product products sale, Shopping Deals.If at the time will discount more Savings So you already decide you want have "Ar-15 Nc-9 9mm Lower Receiver Glock™ Mag Compatible. " for your, but you don't know where to get the best price for this Ar-15 Nc-9 9mm Lower Receiver Glock™ Mag Compatible. . We already done the research and spend a lot of time for you. Ar-15 Nc-9 9mm Lower Receiver Glock™ Mag Compatible.  to find out where to get the best deal on Ar-15 Nc-9 9mm Lower Receiver Glock™ Mag Compatible. . See Special offers and cheap prices Ar-15 Nc-9 9mm Lower Receiver Glock™ Mag Compatible. . Get Big deals and Best Prices now

Categories
Rifle parts receiver parts

308 Ar California Lower Gunbuilders Lower Parts Kit. Where to buy?

308 Ar California Lower Gunbuilders Lower Parts Kit.

CMMG Lower Parts Gunbuilder's Kits contain the needed parts to complete an AR-15 lower receiver.  These kits come less the trigger, grip and trigger guard.  The 308 version includes LR308 takedown and pivot pins as well as an improved bolt catch.  The 308 kits also include a bolt catch screw in place of the AR-15 pin.  This California compliant kit includes a Bullet Button.

Parts list includes: Takedown pin, receiver pivot pin, takedown pin detent (2), takedown pin detent spring (2), hammer and trigger pin (2), safety selector, selector detent, magazine catch, magazine catch spring, Bullet Button, bolt catch, bolt catch plunger, bolt catch spring, bolt catch spring pin, buffer retainer and buffer retainer spring.


AR-15, Issue:11, Page:038
Big Book Catalog, Issue:70, Page:038
308 AR Gunbuilder's Lower Kit Parts for California Complianc

308 Ar California Lower Gunbuilders Lower Parts Kit. On Sale . For those who are looking for 308 Ar California Lower Gunbuilders Lower Parts Kit. review. We have more information about Detail, Specification, Customer Reviews and Comparison Price. I want recommend that you check always the purchase price To get a cheap price or great deal. Order your individual 308 Ar California Lower Gunbuilders Lower Parts Kit. from here. You will be surprised to see how convenient this system can be, and you may feel good knowing that this 308 Ar California Lower Gunbuilders Lower Parts Kit. is amongst the best selling item on today.

Summary

If you find product products sale, Shopping Deals.If at the time will discount more Savings So you already decide you want have "308 Ar California Lower Gunbuilders Lower Parts Kit. " for your, but you don't know where to get the best price for this 308 Ar California Lower Gunbuilders Lower Parts Kit. . We already done the research and spend a lot of time for you. 308 Ar California Lower Gunbuilders Lower Parts Kit.  to find out where to get the best deal on 308 Ar California Lower Gunbuilders Lower Parts Kit. . Get SPECIAL OFFER and cheap Price for 308 Ar California Lower Gunbuilders Lower Parts Kit. . low Price whole store, BUY 308 Ar California Lower Gunbuilders Lower Parts Kit. online now!

Categories
Rifle parts receiver parts

Guide Ar-15 Investment Cast Complete Enhanced Lower Parts Kit.

Ar-15 Investment Cast Complete Enhanced Lower Parts Kit.

Battle Arms Development has put together an Enhanced Complete Lower Parts Kit! The Battle Arms Development Enhanced Complete Lower Parts Kit consists of Battle Arms high quality parts you already know and love, with the added bonus of several Investment Cast items, to ensure the most robust parts for your build.

Enhanced Bolt Catch, which is a cost friendly alternative, without sacrificing the quality for your AR build! The AR-15 Cast Enhanced Bolt Catch is 8620 heat treated cast steel with a manganese phosphate black finish. With this upgrade you have a versatile modular design, enhanced control surfaces, lightweight engineering, and better ergonomics.

  • Enhanced Single Sided Safety Selector for the AR15 Style Rifles- based on the famous BAD-ASS Ambidxtrous Safety Selector with distinctive and diagonal serrations
  • Single Side Safety Selector (0°-90° SEMI AUTO)
  • Fit all Mil-Spec Dimensioned AR-15 Lower Receiver
  • Black Phosphate Finish
  • Investment Cast 8620 Heat Treated Steel
  • Enhanced Magazine Catch
  • Process: Investment Cast (Same Process as Mil-Spec)
  • Material: 8620 Heat Treated Steel Finish: Black Phosphate Finish
  • Construction: One Piece Engineering (Not Two-Piece)
  • Design: Lightweight Fluted Design
  • Compatibility: Compatible with Mil-Spec Magazine Release Button, BAD-EMR, BAD-EMMR, etc.
  • Length: Shorter Threaded Pin to Reduce Installed Magazine Button Profile of Solid Face Magazine Release Buttons
  • Weight: 0.25 oz (v.s. 0.32 oz Mil-Spec)

BAD-EMR (Enhanced Magazine Release) for the AR15/AR10.

  • Precision CNC Machined for billet 7075-T6 Aluminum (not 6061) in an anodized BLACK finish, the BAD-EMR features an unique, fully solid "V" shaped button face with horizontal serrations (no thru hole).
  • The concave V-Groove button face offers excellent ergonomic feel and self-centers the index finger as pressure is applied.  The horizontal, parallel serrations helps slippage in the vertical orientation while minimizing drag in the horizontal direction for finger retraction.
  • The BAD-EMR also features a lightweight skeletonize back to offset the weight gained from the fully solid button face and slightly increased height to equal the weight of the standard mil-spec magazine release (approxmiately 0.002 lbs).  BAD-EMR is compatible with all lower receivers that accepts mil-spec magazine release buttons.

BAD-ATG™

  • Adjustable Tactical Grip easily adjusts, with the included hex key, to each of the three most popular industry proven angles (17, 25, & 33 degrees) using the Patent Pending adjustable angle mechanism.
  • The textured finger grooves and ribbed back-strap optimize comfort and provides positive control. 
  • Dimpled air gaps help keep hand dry while offering firm grip texture. 
  • Only 3.0oz complete with screw and washer!

BAD-EPS Takedown and Pivot Pins:

  • AR15 / M16 / M4 Compatible - Fits all AR15/M16/M4 lower receivers with mil-spec .250" diameter front pivot and rear takedown pin holes.
  • Patent Pending Pivot Pin & Takedown Pin Head Designs - Greatly improved gripping surface and pull strength without the use of oversize heads.
  • Low Profile Pin Heads - Low drag and never in the way. Lower profile than mil-spec pin heads.
  • Ambidextrous Safety Compatible - The Enhanced Takedown Pin (BAD-ETP) head design does not obstruct the use of the right side ambi safety selector lever.
  • Extended Pin Tips (+0.030" over milspec) - Added tip length noticeably aids in starting/pushing the pins out from the left side of the receiver, without undue protrusion.
     

Each BAD-EPS comes with (1) BAD-ETP, (1) BAD-EPP, (2) KNS hardened stainless steel detents, (2) 17-7 nickel plated stainless steel pin springs, and (1) high-strength neodymium magnet for hassle free magnet assisted installation of the Enhanced Pivot Pin (BAD-EPP).

  • Mil-Spec Trigger And Hammer
  • Nickel Teflon Semi Auto Hammer and Trigger
  • Disconnector
  • Disconnector Spring
  • Hammer Spring
  • Trigger Spring
  • Springs and Detents
  • Qty 2 Takedown / Pivot Pin Springs
  • Qty 2 Takedown / Pivot Pin Detents
  • Qty 1 Bolt Catch Detent
  • Qty 1 Bolt Catch Spring
  • Qty 1 Trigger Guard
  • Qty 1 Trigger Guard Roll Pin
  • Qty 2 Hammer / Trigger Pins Mil Spec
  • Qty 1 Safety Selector Detent
  • Qty 1 Safety Selector Detent Spring
  • Qty 1 Magazine Catch Spring
  • Qty 1 Buffer Retainer Detent
  • Qty 1 Buffer Retainer Detent Spring
AR-15 Investment Cast Complete Enhanced Lower Parts Kit

Ar-15 Investment Cast Complete Enhanced Lower Parts Kit. InStock yes  Valid Offer! Things to Buy at this store. If you are not fully satisfied with your purchase, you are welcome to return any unworn and unwashed items with tags intact and original packaging included.Buy at this store. See Detail Online And Read Customers Reviews Ar-15 Investment Cast Complete Enhanced Lower Parts Kit. prices throughout the online source See individuals who buy "Ar-15 Investment Cast Complete Enhanced Lower Parts Kit. "Research before buy online Ar-15 Investment Cast Complete Enhanced Lower Parts Kit. Make sure the store keep your private information private before buying Ar-15 Investment Cast Complete Enhanced Lower Parts Kit. Make sure you can proceed credit card online to buy Ar-15 Investment Cast Complete Enhanced Lower Parts Kit. plus the store protects your information.

Summary

Shopping Tips for buy Ar-15 Investment Cast Complete Enhanced Lower Parts Kit.  No online shopping store/website needs your social security number or your birthday to do business Then you don't give this information to store/website. And do not wait for your bill to come during the end associated with the month. Go online regularly during the holiday season and look at electronic statements for the credit card, debit card, and checking accounts. Make sure you do not see any fraudulent charges. If you found fraudulent charges. If you want to buy Ar-15 Investment Cast Complete Enhanced Lower Parts Kit. . Please buy it from trusted store.

Categories
Rifle parts receiver parts

Lower Receiver Arx 100. Where to sell?

Lower Receiver Arx 100.

FITS: ARX 100, 5.56, 223 Rem

Item Details

Cartridge: 223 Remington, 5.56 mm NATO

Finish: Matte Black

Style: Stripped

Lower Receiver ARX 100

Lower Receiver Arx 100. On Sale . For folks who are seeking Lower Receiver Arx 100. review. We have more details about Detail, Specification, Customer Reviews and Comparison Price. I want recommend that you check always the cost To get a cheap price or whole lot. Order your own Lower Receiver Arx 100. from this point. You will be surprised to view how convenient this system can be, and you will feel good knowing that this Lower Receiver Arx 100. is probably the best selling item on today.

Summary

If you find product products sale, Shopping Deals.If at the time will discount more Savings So you already decide you want have "Lower Receiver Arx 100. " for your, but you don't know where to get the best price for this Lower Receiver Arx 100. . We already done the research and spend a lot of time for you. Lower Receiver Arx 100.  to find out where to get the best deal on Lower Receiver Arx 100. . See Special offers and cheap prices Lower Receiver Arx 100. . Get Big deals and Best Prices now